Gloss-It Concorso Gloss (16oz/472ml) - Instructions
Wash and clean vehicle paint finish with Gloss Car Wash Shampoo before applying Concorso Gloss.
Check paint finish for any remaining contamination (tar, metal particles, or fallout). If contamination is found use our Gloss-it Clay Bar with Gloss Enhancer before applying Gloss Finish. Best results are achieved with Gloss-it Evolution Polish and Gloss Activator before applying Concorso Gloss.
Shake well before applying Concorso Gloss on a cool and cured surface. Apply in shaded area and if possible avoid direct sunlight.
Cyclo or Random Orbital Polisher Application:
Apply bead size amount on each foam pad. Be sure to rub product into pads to help prevent slinging.
Spread polish over the panel evenly with buffer turned off. When using polisher, start on top panels first then proceed to lower panels.
Work orbital polisher in small 2' x 2' sections. Apply 2 to 5 kg of pressure then ease up pressure as imperfections are being removed.
Use criss-cross pattern overlapping from vertical to horizontal direction. Buff until product is no longer visible and defects are removed.
Side Note: For recommended speeds for Random Orbital polisher please download our polishing guide from Gloss-it.com or glossitonline.com
Use Gloss-it Ultra Plush microfibre towel and Gloss Enhancer to remove any additional residue.