Renovo Fabric Hood Reviver in Black, Blue, Brown, Green or Burgundy

Renovo Fabric Hood Reviver in Black, Blue, Brown, Green or Burgundy - Instructions

Clean the surface thoroughly with Renovo Fabric Soft Top Cleaner and then allow it to dry completely. Use Masking Tape to mask off the rear window, the glass and paint. Start the application at the center section of the front of the top. Work from side to side, progressing towards the back, maintaining a "wet edge" as you work towards the rear. (The technique is similar to painting with water based paint). Immediately remove any drips on paint, glass or trim with a wet cloth. If the top is badly faded, apply a second coat after 24 hours drying time. Allow the final coat of Reviver to dry for 24 hours and then follow with a coat or two of Renovo Fabric Ultra Proofer to protect and prolong the life of your new looking top. DO NOT use on vinyl or vinyl impregnated fabric tops. When in doubt, consult the manufacturer. A 500 ml bottle will normally cover the average top with one coat.

Your Viewing History