Motorcycle and Motorbike Accessories

A new system from TyrePal makes it easy to monitor tyre pressures with a display at your driving position. The system uses valve-cap sensors to transmit accurate pressure and temperature data from your tyres. Cornering, steering, road-holding, fuel use and tyre wear all critically rely on four small patches of rubber in contact with the road, so serious attention to tyre pressures pays off in regular road use as well as in race performance. The system continuously displays pressure for each tyre and gives a leak alarm and alerts for low pressure. For performance users, tyre temperature can be displayed by pushing a button, and there are high pressure and high temperature alerts. Alert thresholds are all adjustable from the default settings. Installation is quick and easy. Just screw the sensors onto the tyres in place of standard valve caps and fit the anti-theft collars if required. Position the monitor on the bracket in view of the driver and the job’s done. There’s no need to remove the tyres, no programming and generally no need to even rebalance the wheels. No wiring is required. Power for the monitor can be from internal batteries that last about six months or from the vehicle’s 12V power supply with the plug-in connector provided. Lithium batteries in the valve-cap sensors last 1 to 2 years and are replaceable. Pressure can be displayed in psi, bar or KPa, with an accuracy ±1psi. Maximum pressure is 60psi, suitable for most cars, with a high pressure version also available. Temperature in C or F is accurate to 2C.

A new system from TyrePal makes it easy to monitor tyre pressures with a display at your driving position. The system uses valve-cap sensors to transmit accurate pressure and temperature data from your tyres. Cornering, steering, road-holding, fuel use and tyre wear all critically rely on two small patches of rubber in contact with the road, so serious attention to tyre pressures pays off in regular road use as well as in race performance. The system continuously displays pressure for each tyre and gives a leak alarm and alerts for low pressure. For performance users, tyre temperature can be displayed by pushing a button, and there are high pressure and high temperature alerts. Alert thresholds are all adjustable from the default settings. Installation is quick and easy. Just screw the sensors onto the tyres in place of standard valve caps and fit the anti-theft collars if required. Position the monitor on the bracket in view of the driver and the job´s done. There´s no need to remove the tyres, no programming and generally no need to even rebalance the wheels. No wiring is required. Power for the monitor can be from internal batteries that last about six months or from the vehicle´s 12V power supply with the plug-in connector provided. Lithium batteries in the valve-cap sensors last 1 to 2 years and are replaceable. Pressure can be displayed in psi, bar or KPa, with an accuracy ±1psi. Maximum pressure is 60psi, suitable for most cars, with a high pressure version also available. Temperature in Degrees Centigrade or Fahrenheit is accurate to 2 degrees C.

New 2009 Zymol Talon Motorcycles Glaze, or wax, for motorbikes, is a completely new product featuring NEW Talon wax (56g). The kit also includes: 250ml HD-Cleanse pre-wax Pre-wax Applicator (white, machine washable) Microwipe (buffing cloth) All presented in a luxurious silky drawstring bag.

The AccuMate is the sister product to the well established OptiMate battery charger/optimiser, which has a proven reputation with over 30,000 OptiMates sold annually in the UK alone. Like the OptiMate, the AccuMate is designed to automatically charge and monitor batteries with no danger of over-charging regardless of time. The AccuMate is suitable for all 6 and 12V lead acid batteries from 4Ah to 75Ah, making it perfect for owners of older vehicles which are not used on a daily basis. Operation of the AccuMate is completely automatic. It uses a 1.2A constant current charge as the main stage, while monitoring the battery voltage. When this reaches a pre-set cut off point, it then switches to an intermediate constant voltage 'float charge'. Only when the AccuMate has detected that the battery is properly charged, will it switch to the final stage for correct long-term battery maintenance, and indicate a green LED. If at any time the AccuMate detects that the battery has discharged, it will automatically revert to the constant current stage. Lead Lengths From mains plug to unit = 2m From unit to connectors = 2.4m Power usage on maintainance charge:

The CTEK XS 800 easily charges all small batteries. It's perfect for your Motorcycle, Lawn Mower or Jet Ski. The CTEK XS 800 is also an ideal maintenance charger for seasonal vehicles with batteries up to 100Ah. The CTEK XS 800 is delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification. If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging. You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger. Lead Lengths From mains plug to unit = 1.7m From unit to connectors = 1.5m

Motorcycle cover from Maypole. This top of the range deluxe bike cover offers great value for money, featuring Heat resistant panels and vents and complete with a handy storage bag. Large fits motorcycles up to 2300mm long.

Chromed or plated surfaces need to be treated gently, so Zymol Metall Polish was developed specifically for automotive brightwork. Common brightwork metals include stainless steel, aluminium, nickel and others, all of which are susceptible to damage by salt corrosion, engine oils, acids and other environmental exposure. Zymol Metall Polish has a special blend of oils that gently remove the tarnish and discolouration caused by exposure to the elements.

Blackfire Long Lasting Tyre Gel is a thick water-based gel engineered from a new group of super-polymers that have been fortified with Polycharger technology. It contains no butyls, alcohols or petroleum distillates of any kind, meaning that it will not degrade your tyres in any way, even when used on a regular basis. The viscosity of the gel enables precise application and minimises the risk of sling being thrown onto adjacent body panels. Treated tyres will retain a rich satin black finish that will last wash after wash for many weeks at a time.

Blackfire Gel Wheel & Tyre Cleaner is a water-based wheel and tyre cleaner that contains no acids, petroleum-based solvents, butyls or butyl ethers of any kind. Instead, it relies on cutting-edge non-ionic surfactant technology to gently break down and loosen tough deposits of brake dust and road grime. Blackfire Gel Wheel & Tyre Cleaner quickly and safely cleans tyres and all types of wheels, including billet aluminium, chrome plated, polished, anodised, painted and clearcoated rims. Unlike many of the more aggressive wheel cleaners available on the market today, Blackfire Gel Wheel & Tyre Cleaner can be used repeatedly without any danger of causing etching or flaking, making it ideal for incorporating into your regular wash routine. While the thick consistency of this product allows it to cling to surfaces and effectively loosen brake dust and road grime, it also rinses freely and easily to leave tyres and rims streak and spot free.

Shine and protect your wheels with this superb product. Reduces brake dust adhesion by 75%, make cleaning easier and reduce pitting. Rimwax is a carnauba based wax specifically for wheels (all types). Offering ultimate shine and protection and will reduce brake dust build up by up to 75%, leaving the remaining 25% easy to remove Rimwax is carnauba wax based, Carnauba wax is one of the hardest forms of natural wax, (found in good car care products) Rimwax like all smartwax products uses White carnauba wax which is the purest, which offers deep shine and good protection. This accelerates water run off, which helps keep the wheels clean. Rimwax is easy to apply and remove Carnauba wax is normally hard to apply and remove, Rimwax is easy to apply and remove, which reduces effort required and saves time. Rimwax can be applied to a wet surface, so it is not essential that the surface is completely dry after washing, it can also be applied in direct sunlight, left in the sun all day and still be removed easily, meaning you don’t have to wait for “windows of opportunity” to apply! Rimwax is non abrasive, so it will not damage the surface it is applied to. Rimwax will help protect the surface from harmful UV light, which will help prolong the life of the wheel. Protecting your investment. Rimwax will withstand high temperatures created by the wheels, brakes etc, without “yellowing” or breaking down, which means a coating of rimwax will last a long time. (Depending on road conditions and mileage etc). Rimwax will deflect brake dust and reduce build up by up to 75%, which helps keep the wheels looking good for longer, the remaining 25% washes off with little effort, making keeping the appearance of the wheels easy. The long term effects of brake dust penetrating a wheels surface can cause serious damage and cost a lot to repair and will have a negative effect on the appearance of the wheels. Rimwax will remove minor swirls, although it is non abrasive, the formula will fill, and remove the swirls, giving the wheels an excellent finish and unbeatable shine. Rimwax like all smart products comes with a lifetime guarantee; if for any reason you are unhappy with the product, return for a full refund, no hard feelings! A little goes a long way, used sparingly rimwax will offer amazing value, and because it is long lasting, it doesn’t require re-application every time the vehicle is washed.

A double power version of our entry unit, made to the same high standards.

• Outstanding polish for: chrome, copper, brass, aluminum, stainless steel and other metalwork • Great for bluing on exhausts • For cars, boats, planes, motorhomes, motorcycles, trucks and more • Restores+shines metal surfaces • Helps remove bluing • Easy to use and highly effective