CTEK Battery Chargers & Conditioners (CTEK)

The MXTS 70 is a very powerful workshop charger with state of the art technology. It is developed to serve both 12V and 24V batteries, offers very sophisticated technology and is extremely user friendly. The MXTS 70 is featured with different displays showing the status of charging, charge voltage, current, charge time (h) and energy indication (Ah) for battery condition control. The MXTS 70 is equipped with all necessary features and functions required for professional battery care at a workshop, such as: - Selectable modes for optimal battery size adaptation - Selectable charge algorithm for best flexibility - Selectable power supply mode for constant voltage output of 13.6V (max 70A) or 27.2V (max 35A) - Patented desulphation function - Reconditioning function to restore stratified and deeply discharged batteries - Unique float/pulse maintenance charging - Diagnostic features to determine if a battery can receive and retain a charge - Temperature sensor for optimised charging at all times The MXTS 70 is a fully automatic 8-step charger that delivers selectable 70A/12V or 35A/24V to batteries from 40-1500Ah for 12V and 200-750Ah for 24V. The charger is IP 20 classified, housed in heavy duty aluminium for rough environments and designed to protect vehicle electronics. It is non-sparking, reverse polarity protected and short-circuit proof. The MXTS 70 is delivered with a 2-year warranty.

The MXT 14 is a professional 24V charger. It is developed for commercial vehicles where the batteries are put under considerable strain and is ideal for buses, trucks and CV workshops. The MXS 14 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The MXT 14 is a fully automatic 8-step charger that delivers 14A to 24V batteries from 28–300Ah and is suitable for maintenance charging up to 500Ah. The charger is IP 44 classified (outdoor use), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty. It also has a supply capability so is ideal for temporary maintainance of vehicle settings when the battery is disconnected eg for remapping. Supplied with clamps, temp sensor on cable.

Technical Summary Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging Temperature sensor RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Model number: 1055 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: NORMAL: 14.4V, RECOND: 15.8V, SUPPLY: 13.6V Min battery voltage: 2.0V Charging current: 25A max Current, mains: 2.9A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 40–300Ah up to 500Ah for maintenance Dimensions: 235 x 130 x 65mm (L x W x H) Insulation class: IP44 Weight: 1.9kg Note: there is also the Multi XS 25000 Extended with a 6 metre cable, based on the previous unit (very similar performance) at an extra £80. Please phone to order.

The CTEK MULTI XS 25000 is powerful for batteries that require rapid charging: in your RV, boat, or workshop. The charger automatically adjusts the charge to the battery's temperature. The CTEK MULTI XS 25000 has the same handy Supply-Mode as the CTEK MULTI XS 7000. The CTEK MULTI XS 25000 features built-in functions that analyse the status of your battery. Maintenance charging uniquely combines battery requirements of high capacity and long life. The CTEK MULTI XS 25000 is delivered with a battery lead with clamps, colour coded for easy +/- identification. The charger also has a sensor cable located together with the battery leads. The unit automatically adjusts the charge voltage if the temperature deviates from +25°C. Higher temperatures lower the voltage and lower temperatures raise the voltage. The sensor cable can be extended or shortened without affecting functionality. The charger must be fitted with the top or long side facing up to be approved for outdoor use. Lead Lengths From mains plug to unit = 1.7m From unit to connectors = 1.5m

Techincal Summary: Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Step 7: Fully charged battery Step 8: Maintenance charging Temperature sensor COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Technical Specification: Model number: 1046 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V Min battery voltage: 2.0V Charging current: 10A max Current, mains: 1.0A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 20–200Ah, up to 300Ah for maintenance Dimensions: 197 x 93 x 49mm (L x W x H) Insulation class: IP65 Weight: 0.8kg

Technical Summary: Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Techical Specification: Model number: 1053 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V Min battery voltage: 2.0V Charging current: 7A max Current, mains: 1.2A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 14–150Ah up to 225Ah for maintenance Dimensions: 191 x 89 x 48mm (L x W x H) Insulation class: IP65 Weight: 0.8kg

Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Step 7: Fully charged battery Step 8: Maintenance charging COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries Technical Specification: Model number: 1049 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V Min battery voltage: 2.0V Charging current: 5A max Current, mains: 0.65A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 1.2–110Ah up to 160Ah for maintenance Dimensions: 168 x 65 x 38mm (L x W x H) Insulation class: IP65 Weight: 0.6kg

The MXS 3.6 is a proven and reliable charger. It offers important features such as desulphation, maintenance charging and cold mode for optimised charging during cold winter days. It is also suitable for charging demanding AGM batteries (i.e. Optima). It is the ideal charger for those looking for quality and simple connect and forget charging. The MXS 3.6 is a fully automatic 4-step charger that charges 12V batteries from 7–75 Ah and is suitable for maintenance charging up to 120Ah. The MXS 3.6 is IP 65 classified (splash and dust proof) and delivers selectable 0.8A or 3.6A. It is designed to protect vehicle electronics and is non-sparking-, reverse polarity protected and short-circuit proof. The MXS 3.6 is delivered with a 5-year warranty.

The CTEK XC 800 is a full-featured 6V charger in mini format. It gives the batteries of your vintage vehicle a new life. CTEK XC 800 charges small batteries that hold as little as 1 Ah, up to the biggest tractor batteries. The CTEK XC 800 is delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification. If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging. You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger. Lead Lengths From mains plug to unit = 1.7m From unit to connectors = 1.5m

Worried about your car being dented in car parks, on ferries or in the garage ? Concerned about another, less careful driver opening a door onto your car and leaving a ding and driving off, leaving you with the bill ? Here's the answer - magnetic strips inside the thick, weatherproof nylon encased dense foam will stop any dings to your vehicle. A soft contact strip will keep paintwork in good order and the security tag, which closes inside your door,will prevent these being stolen. They come as a linked pair to cover one side. We now only have a few oddments left, each will protect one side of your car, ex-demo, as follows: Red: full length (70cm + 70cm, linked), £30 Silver: (50cm + 50cm, linked): £25 Black: as per silver except 55cm + 55cm, £25 Black or silver ordering is by phone only 0800 1777 808

New in Feb. 2009 - CTEK Comfort Indicator with a 1.5 metre extension so you can run it into the car to check the battery condition at a glance. Simply connect the twin 8.4mm eyelets to the battery terminal and one of 3 LEDs will light to tell you if the battery is fine (green), could do with a charge soon (amber) or needs a charge now (red). Very handy indeed ! 'Easy way to tell if your battery needs a charge. Discreet and well made' said AutoExpress (12/2/09)

New in Feb. 2009 - CTEK Comfort Indicator. Simply connect the twin crocodile clips to the battery terminal and one of 3 LEDs will light to tell you if the battery is fine (green), could do with a charge soon (amber) or needs a charge now (red). Very handy indeed ! 'Easy way to tell if your battery needs a charge. Discreet and well made' said AutoExpress (12/2/09)