Cabriolet Vinyl Hood Care

Water, formaldehyde and silicone are the enemy of tires. Water washes away the natural oils in rubber that keep it elastic. Formaldehyde dissolves rubber on contact and silicone penetrates rubber breaking down both natural and synthetic compounds. We have the answer; Zymol Tyre Preserve. A new waterless natural cleaner and conditioner for automotive rubber. Zymol Tyre Preserve cleans, penetrates, rejuvenates and protects against drying and ultraviolet rays while enhancing colour and leaving a subtle natural glow. It is also possible to apply Zymol Tyre Preserve to all external Vinyl & Plastics i.e. bumpers, spoilers.

Renovo Vinyl Cleaner (500ml) deep-cleans heavily soiled vinyl and vinyl coated fabric tops, boat covers, motorcycle covers and RV covers. It will safely and effectively remove imbedded grime, tree sap and bird droppings. Brush or sponge on a thin coat, allow it to clean for a few minutes, gently scrub with a sponge, soft cloth or soft brush to loosen stubborn dirt, rinse thoroughly with water to remove all traces of cleaner and then dry. Heavily soiled or surfaces with deep graining may require the cleaner to work for up to an hour, before rinsing, and gentle brushing with a soft bristle brush to remove the imbedded dirt. Immediately remove any drips on paint, glass or trim with a wet cloth. Once the clean top/cover has completely dried, follow immediately with an application of Renovo Vinyl Ultra Proofer. Always test a small area prior to use to insure colorfastness of the material.

Renovo Vinyl Protector (500ml) conditions, protects and prolongs the life of all vinyl and vinyl coated fabric tops. Vinyl Ultra Proofer forms a UV barrier that helps prevent premature fading of vinyl and acts as a shield against the ravages of dirt, stains, tree sap and bird droppings. Clean the top thoroughly with Vinyl Soft Top Cleaner and allow the top to completely dry. Pour the Vinyl Top Ultra Proofer into a suitable container. Then use a 2” wide nylon paint brush, disposable foam brush or foam paint roller to apply a thin even coat over the entire surface. Immediately remove any drips on paint, glass or trim with a wet cloth. Allow to dry for 2-3 hours before folding the top. Do not use on fabric tops. A 500 ml bottle will normally cover the average top with one coat.