Renovo Fabric Hood Ultraproofer

Renovo Fabric Hood Ultraproofer - Instructions

Use the Renovo Fabric Soft Top Cleaner to completely clean the top or cover prior to waterproofing. Mask off all the windows and paint and allow the surface to dry completely before applying Ultra Proofer. Use a 2" wide nylon paint brush, disposable foam brush, foam paint roller or air brush and start at the center of the forward edge of the top. Apply a thin, even coat to the top working from side to side towards the rear of the top. Immediately remove any drips on paint, glass or trim with a wet cloth. Allow it to completely dry for 24 hours before folding the top. The "water bead test" will determine the condition of existing top protectant. If water beads evenly when wet, then the existing protectant is in good condition. If water does not bead evenly or soaks into the material, then apply a coat of Fabric Ultra Proofer.

Your Viewing History