Battery Chargers & Conditioners For Bikes & Scooters

OptiMateTM4, the ultimate all-in-one tool for 12V battery care at home, now with DUAL PROGRAM that diagnoses, recovers, charges, tests and optimally maintains, automatically. Charge the battery direct or select the program to charge via the 12V port on your CAN-bus equipped bike. With automatic KEY-LESS activation OptiMate 4 DUAL PROGRAM will charge and maintain your battery automatically until it is disconnected. OptiMate 4 DUAL PROGRAM includes Low voltage PULSE recovery for even more effective recovery of badly neglected, sulphated batteries; a user friendly battery test at connection; a slick weatherproof enclosure with built-in mounting lugs and improved energy efficiency. Extending battery life by up to 400%, OptiMate 4 DUAL PROGRAM will maintain your battery safe and ready-to-go for months on end.

The AccuMate is the sister product to the well established OptiMate battery charger/optimiser, which has a proven reputation with over 30,000 OptiMates sold annually in the UK alone. Like the OptiMate, the AccuMate is designed to automatically charge and monitor batteries with no danger of over-charging regardless of time. The AccuMate is suitable for all 6 and 12V lead acid batteries from 4Ah to 75Ah, making it perfect for owners of older vehicles which are not used on a daily basis. Operation of the AccuMate is completely automatic. It uses a 1.2A constant current charge as the main stage, while monitoring the battery voltage. When this reaches a pre-set cut off point, it then switches to an intermediate constant voltage 'float charge'. Only when the AccuMate has detected that the battery is properly charged, will it switch to the final stage for correct long-term battery maintenance, and indicate a green LED. If at any time the AccuMate detects that the battery has discharged, it will automatically revert to the constant current stage. Lead Lengths From mains plug to unit = 2m From unit to connectors = 2.4m Power usage on maintainance charge:

The CTEK XC 800 is a full-featured 6V charger in mini format. It gives the batteries of your vintage vehicle a new life. CTEK XC 800 charges small batteries that hold as little as 1 Ah, up to the biggest tractor batteries. The CTEK XC 800 is delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification. If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging. You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger. Lead Lengths From mains plug to unit = 1.7m From unit to connectors = 1.5m