CTEK MULTI XS 7000 (12V)

CTEK MULTI XS 7000 (12V) - Charge Characteristics

Using the CTEK MULTI XS 7000 has a fully automatic, six step charge. Using the CTEK MULTI XS 7000 gives your battery an optimum service life and operational reliability.

Setting: 14.4V or 14.7V

• Stage 1: (Desulphation)
  Runs a complete charge cycle within a fraction of a second. The cycle repeats during the whole desulphation phase. Every cycle recovers some lead sulphate into useful material.
• Stage 2: (Start)
  Starting phase for charging. Charging with limited charging current. The starting phase is over when the voltage rises above 10.5V, at which time the charger switches to bulk charging.
• Stage 3: (Bulk)
  Charging where 80% of the energy is returned. The charger delivers maximum current until the battery voltage has reached the set level.
• Stage 4: (Absorption)
  Final part of the charge up to 100%. The battery voltage is kept constant at the set level, during which time the current drops gradually.
• Stage 5: (Pulse)
  Maintenance charging. The state of charge varies between 95% and 100%. A pulse is sent out to the battery if the voltage drops. This keeps the battery in trim when not in use. The charger can be connected for months at a time.

Your Viewing History