CTEK MULTI XS 7000 (12V)

CTEK MULTI XS 7000 (12V) - Battery Types & Settings

The CTEK MULTI XS 7000 can be set very easily to charge different types of lead-acid batteries (Wet, MF, GEL and AGM) and conditions.

The CTEK MULTI XS 7000 charges a wide range of battery sizes, from 14Ah to 225Ah.

• 14.4V:- Normal setting for wet batteries, MF and for most Gel batteries.
• 14.7:- This setting is recommended for charging batteries at temperatures lower than -5 degrees C. It is also suitable for many AGM batteries.
• 13.6V/SUPPLY:- In this mode, the charger delivers a constant voltage of 13.6V. This is the best maintenance mode for applications where maximum capacity from the battery is important. The MULTI XS 7000 can also be used as a power supply without a battery attached in this mode. No counter voltage is necessary to start the charger in this mode. Note that the spark free function is suppressed in this mode, the reverse polarity protection works but there is no indication..
• 16V/RECOND:- This mode is used to recover severely discharged batteries where you might expect stratified acid (high acid weight at the bottom, low on top). Note that the battery has to be fully charged first. Use this mode with care, as the high voltage may cause some water loss. 16V is normally no problem for electronics in 12V systems, although maximum effect and minimum risk for electronics is achieved by disconnecting the battery.

Your Viewing History