Battery Chargers & Conditioners For Cars

The MXTS 70 is a very powerful workshop charger with state of the art technology. It is developed to serve both 12V and 24V batteries, offers very sophisticated technology and is extremely user friendly. The MXTS 70 is featured with different displays showing the status of charging, charge voltage, current, charge time (h) and energy indication (Ah) for battery condition control. The MXTS 70 is equipped with all necessary features and functions required for professional battery care at a workshop, such as: - Selectable modes for optimal battery size adaptation - Selectable charge algorithm for best flexibility - Selectable power supply mode for constant voltage output of 13.6V (max 70A) or 27.2V (max 35A) - Patented desulphation function - Reconditioning function to restore stratified and deeply discharged batteries - Unique float/pulse maintenance charging - Diagnostic features to determine if a battery can receive and retain a charge - Temperature sensor for optimised charging at all times The MXTS 70 is a fully automatic 8-step charger that delivers selectable 70A/12V or 35A/24V to batteries from 40-1500Ah for 12V and 200-750Ah for 24V. The charger is IP 20 classified, housed in heavy duty aluminium for rough environments and designed to protect vehicle electronics. It is non-sparking, reverse polarity protected and short-circuit proof. The MXTS 70 is delivered with a 2-year warranty.

The MXT 14 is a professional 24V charger. It is developed for commercial vehicles where the batteries are put under considerable strain and is ideal for buses, trucks and CV workshops. The MXS 14 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The MXT 14 is a fully automatic 8-step charger that delivers 14A to 24V batteries from 28–300Ah and is suitable for maintenance charging up to 500Ah. The charger is IP 44 classified (outdoor use), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty. It also has a supply capability so is ideal for temporary maintainance of vehicle settings when the battery is disconnected eg for remapping. Supplied with clamps, temp sensor on cable.

Technical Summary Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging Temperature sensor RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Model number: 1055 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: NORMAL: 14.4V, RECOND: 15.8V, SUPPLY: 13.6V Min battery voltage: 2.0V Charging current: 25A max Current, mains: 2.9A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 40–300Ah up to 500Ah for maintenance Dimensions: 235 x 130 x 65mm (L x W x H) Insulation class: IP44 Weight: 1.9kg Note: there is also the Multi XS 25000 Extended with a 6 metre cable, based on the previous unit (very similar performance) at an extra £80. Please phone to order.

Techincal Summary: Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Step 7: Fully charged battery Step 8: Maintenance charging Temperature sensor COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Technical Specification: Model number: 1046 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V Min battery voltage: 2.0V Charging current: 10A max Current, mains: 1.0A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 20–200Ah, up to 300Ah for maintenance Dimensions: 197 x 93 x 49mm (L x W x H) Insulation class: IP65 Weight: 0.8kg

Technical Summary: Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Techical Specification: Model number: 1053 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V Min battery voltage: 2.0V Charging current: 7A max Current, mains: 1.2A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 14–150Ah up to 225Ah for maintenance Dimensions: 191 x 89 x 48mm (L x W x H) Insulation class: IP65 Weight: 0.8kg

Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Step 7: Fully charged battery Step 8: Maintenance charging COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries Technical Specification: Model number: 1049 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V Min battery voltage: 2.0V Charging current: 5A max Current, mains: 0.65A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 1.2–110Ah up to 160Ah for maintenance Dimensions: 168 x 65 x 38mm (L x W x H) Insulation class: IP65 Weight: 0.6kg

OptiMateTM4, the ultimate all-in-one tool for 12V battery care at home, now with DUAL PROGRAM that diagnoses, recovers, charges, tests and optimally maintains, automatically. Charge the battery direct or select the program to charge via the 12V port on your CAN-bus equipped bike. With automatic KEY-LESS activation OptiMate 4 DUAL PROGRAM will charge and maintain your battery automatically until it is disconnected. OptiMate 4 DUAL PROGRAM includes Low voltage PULSE recovery for even more effective recovery of badly neglected, sulphated batteries; a user friendly battery test at connection; a slick weatherproof enclosure with built-in mounting lugs and improved energy efficiency. Extending battery life by up to 400%, OptiMate 4 DUAL PROGRAM will maintain your battery safe and ready-to-go for months on end.

The MXS 3.6 is a proven and reliable charger. It offers important features such as desulphation, maintenance charging and cold mode for optimised charging during cold winter days. It is also suitable for charging demanding AGM batteries (i.e. Optima). It is the ideal charger for those looking for quality and simple connect and forget charging. The MXS 3.6 is a fully automatic 4-step charger that charges 12V batteries from 7–75 Ah and is suitable for maintenance charging up to 120Ah. The MXS 3.6 is IP 65 classified (splash and dust proof) and delivers selectable 0.8A or 3.6A. It is designed to protect vehicle electronics and is non-sparking-, reverse polarity protected and short-circuit proof. The MXS 3.6 is delivered with a 5-year warranty.

The AccuMate is the sister product to the well established OptiMate battery charger/optimiser, which has a proven reputation with over 30,000 OptiMates sold annually in the UK alone. Like the OptiMate, the AccuMate is designed to automatically charge and monitor batteries with no danger of over-charging regardless of time. The AccuMate is suitable for all 6 and 12V lead acid batteries from 4Ah to 75Ah, making it perfect for owners of older vehicles which are not used on a daily basis. Operation of the AccuMate is completely automatic. It uses a 1.2A constant current charge as the main stage, while monitoring the battery voltage. When this reaches a pre-set cut off point, it then switches to an intermediate constant voltage 'float charge'. Only when the AccuMate has detected that the battery is properly charged, will it switch to the final stage for correct long-term battery maintenance, and indicate a green LED. If at any time the AccuMate detects that the battery has discharged, it will automatically revert to the constant current stage. Lead Lengths From mains plug to unit = 2m From unit to connectors = 2.4m Power usage on maintainance charge:

The CTEK XC 800 is a full-featured 6V charger in mini format. It gives the batteries of your vintage vehicle a new life. CTEK XC 800 charges small batteries that hold as little as 1 Ah, up to the biggest tractor batteries. The CTEK XC 800 is delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification. If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging. You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger. Lead Lengths From mains plug to unit = 1.7m From unit to connectors = 1.5m

Extension cable for the SE135 and SE-170 solar powered battery conditioners. Length: 10 feet, 3 metres Fits: SE-135, SE-400, SE-1200, and the new SE-150, SE-500, SE-1500