Battery Charger Accessories

This special accessory plug lead for use with AccuMates and OptiMate III allows connection to standard car cigarette lighter sockets and also small accessory sockets fitted to some BMW, Triumph & Honda motorcycles by removing the detachable red sleeve. It also fits the matching accessory plug socket. It allows easy connection of an AccuMate (or OptiMate III) to a car's cigarette lighter socket or a motorcycle's accessory socket. It is of particular use for any other vehicles where use of the standard fused permanent lead is not practical for any reason. Note – before ordering, please check that your cigarette lighter is live when the ignition is OFF. The accessory plug lead is wired for NEGATIVE EARTH vehicles – if you have a positive earth vehicle, it is necessary to rewire the plug accordingly – this is a simple job as screw terminals are used.

The CTEK Cigarette Plug Connection Lead is a more convenient way to connect the CTEK XC 800, CTEK XS 800 & CTEK MULTI XS 3600 through the interior of your vehicle instead of accessing the battery compartment, which for some can be both time consuming and awkward in itself.

This wall mounting bracket can be used to mount the OptiMate or AccuMate on a wall or workbench. Complete with cable storage - ideal for use with the extension lead.

2.5 metre extension cable for use with AccuMate or OptiMate III. A 2.5 metre extension cable which allows the AccuMate or OptiMate to be used further from the vehicle or battery. Simply plug one end into the outlet lead of the AccuMate or OptiMate and the other end into the required accessory cable (supplied with AccuMate & OptiMate).

This is the latest version of the fused permanent connection lead - our most popular accessory. This fused eyelet lead is the same as the one supplied originally with every AccuMate & OptiMate but it now has a rubber cover for the 2-pin connector. You can use additional leads to fit one to every vehicle which requires its battery to be charged - in this way an AccuMate or OptiMate can be used with several vehicles on a rotational basis very simply and quickly. They are of particular use where the vehicle is exposed to water a lot. Simply connect the 2 ring terminals to your battery and the 2-pin connector will always be available to connect your AccuMate to without having to delve into the vehicle.

The fused eyelet lead is the same as the one supplied originally with every AccuMate & OptiMate - additional leads enable the owner to fit one to every vehicle which requires its battery to be charged. In this way an AccuMate or OptiMate can be used with several vehicles on a rotational basis very simply and quickly. Dealers use these as standard fitment when preparing cars, motorcycles & ATVs etc. or when fitting alarms. They are of particular use where access to the vehicle's battery is limited. Simply connect the 2 ring terminals to your battery and the 2-pin connector will always be available to connect your AccuMate to without having to delve into the vehicle.

The CTEK Eyelet Terminal Connection Lead is a more convenient way to connect the CTEK XC 800, CTEK XS 800 & CTEK MULTI XS 3600 making a more permanent connection to your battery pole, which for some can be both time consuming and awkward in itself. By connecting the Eyelet to the thread of the clamping system around the battery poles, you are then presented with a plug to simple connect and then disconnect the charger when necessary.