Blackfire All Finish Paint Protection

Blackfire All Finish Paint Protection - Instructions

Blackfire All Finish Paint Protection can be applied equally well by hand or dual action machine. For best results by hand, it should be applied to freshly polished paint using a Blackfire Ultimate Applicator Pad.
Only 2-3 pea-sized drops of product are required per panel, and these should be applied as thinly and evenly as possible to produce a film that should then be allowed to cure for up to 15 minutes.
Once hazed over, this film should then be buffed off carefully using a deep pile microfibre towel. For best results using a dual action polisher, Blackfire All Finish Paint Protection should be applied to freshly polished paint using a Lake Country 140 mm Finishing Pad. Only 1-2 pea-sized drops of product are required per panel, and these should be worked in thoroughly at around 3000-4000 orbits per minute (speed 3-4 on most dual action machine polishers) until only a thin film remains. After being allowed to haze over for up to 15 minutes, this film should then be buffed off carefully using a deep pile microfibre towel.

Your Viewing History